AIチャットサポート窓口
TOP
Questions and Answers
Can Bell Hammer be applied to pillow balls?
最終更新日 : 2023/04/11
Can Bell Hammer be applied to pillow balls?
It can be used. I think it will be effective.
関連する質問
What is the difference between LS series, H1 series and GOLD series?
Do you have MSDS/SDS (Product Safety Data Sheet)?
Will it affect rubber, resin, or plastic?
What is the heat resistant temperature?
What is the cold resistance temperature?
Is it penetrative?
What is the CC of the undiluted solution in the spray type 420ml?
Do you support clean rooms?
Is silicone oil or silicone oil used for the bell hammer?
What is the shelf life of Bell Hammer Series (LS/H1/GOLD)?
Please tell me how to save the Bell Hammer Series (LS/GOLD/H1).
What is the difference between LS Bell Hammer Grease No.0 and No.2?
What is LS Bell Hammer Grease Spray?
LS Bell Hammer Cartridge Grease 420ml Is there a way to distinguish No.0 and No.2?
There are red cap and black cap products for bell hammers. What is the difference?
What is the viscosity of LS Bell Hammer GOLD?
Please tell us about the standard called "H1".
Are Food Machinery Lubricants Approved by the Ministry of Health, Labor and Welfare? (Lubricants compatible with the Food Sanitation Law)
Please tell me about the viscosity of H1 bell hammer
Do you know the NSF certified whiteboard certification number?
Is it safe to mix H1 spray, grease, and concentrate?
Is the smoke produced when the H1 exposed to heat harmful?
Can LS Bell Hammer or LS Bell Hammer GOLD be used as a bolt loosening agent? Can the bolts be reused?
Please tell me the addition ratio of LS bell hammer and LS bell hammer GOLD stock solution to the gear oil of the reducer.
Is it effective for cutting tools such as drills and taps?
We would like to refuel the slide shaft that slides up and down the press. Is it possible to use it?
Is it effective for sliding beds on general-purpose lathes?
Does LS Bell Hammer have anti-rust effect?
When used in a "one-way clutch," will it fall into a state where torque cannot be transmitted (idling)?
I would like to use it as a press oil, but is it okay?
Can it be used as a release agent?
Can it be used to prevent galling of screws (prevention of seizure)?
Is there any effect on the rubber (mechanical seal/oil seal)/seal chain?
Can I add it to my motorcycle's two-stroke oil?
Is it possible to add it to the motorcycle engine oil (mission oil)?
Is it possible to add dry clutch type motorcycles and scooters to engine oil and gear oil?
Can it be used as engine built-in oil?
Can it be added to front fork oil?
Will the chain get dirty when used on a bicycle or motorcycle chain?
Is it okay to use it on top of the oil that I used to use?
Will it scatter when used on a bicycle or bike chain?
Can it be used for bike wheel bearings?
Can I use a bell hammer on a motorcycle brake piston?
Can I use it for a bicycle seatpost?
Can it also be used as an oil additive for car engine oils?
Is it okay to mix with other oils?
Please tell me the viscosity and oil number of LS bell hammer.
What is the effect of adding LS Bell Hammer to engine oil?
When using it as an additive, is it necessary to add it after every engine oil change?
Can it be added to diesel engines (clean diesel)?
Can it be used for AT fluid (automatic transmission fluid) or CVT fluid?
Can it be used for shock parts of car suspension?
Can it be used for LSD (Limited Slip Diff)?
If added to oil, does it have any effect on the crosshatch?
Can I use a spray to add it to the engine oil?
Can it be added to diff (diff oil)?
Can I use it to maintain the winch of a yacht?
Is it effective even if the faucet at home has stopped working for a long time?
Is it effective for shutters at home?
I would like to use it on the axis of a fan/ventilation fan. Is there any problem?
Can it be used for sewing oil?
Is there any toxicity when the LS bell hammer is touched?
Can I use it for a hand spinner?
Can it be used as an engine oil additive for jet skis (superchargers)?
Can it be used on a chainsaw bar?
Can it be used for combine teeth of agricultural machinery?
Can it be used for keyholes?
Can it be added to the generator engine oil?
Is there a product that can be used as a substitute for paraffin when used on the skiing surface?
Is it water replaceable?
I plan to apply it on a chain that has been washed with water. Is it necessary to wipe off the water?
Is it possible to add engine oil to a dry clutch bike that uses a one-way clutch?
Do you have an oil resistance table?
Can it be added to power steering oil (power steering oil)?
Can Bellhammer Grease be used on the drive shaft of a car?
Can it be used for fishing reels?
Can LS Bell Hammer Spray be added to engine oil?
Can it be mixed with the machine oil of the loom and used?
Can it be added to a radio controlled gasoline engine?
Can it be added to the engine oil of turbo cars?
Can it be used for air cylinders?
Can LS Bell Hammer Gold be used for BB and hubs?
The car air conditioner uses R12 gas. Can I add a bell hammer?
Can it be used for a vehicle's front hub bearing or kingpin bearing?
Is LS Bell Hammer water-soluble or water-insoluble?
Please tell me the quantity of LS bell hammer spray specified by the Fire Service Act.
Is LS bell hammer grease containing molybdenum?
Is there an expiration date?
What is the purchase method?
Can I add it to a car mission?
Can it be added to the oil of hydraulic power steering?
Can I add it to the compressor oil of the R12 air conditioning system?
Is it possible to add to manual transmission and Diff with built-in Torsen LSD?
What is the LS Bell Hammer?
Does Bellhammer contain polyvinyl stearate?
Can I order by phone?
Can a manual car be added to engine oil?
Why is spray cheaper with 420 ml of spray and 300 ml of undiluted solution?
Can I add it to the gasoline on my bike?
How is LS Bell Hammer Spray 420ml classified in the Hazardous Materials Classification (Class 1 to 6) under the Fire Service Law?
What is the dangerous substance content of LS Bell Hammer Spray 420ml?
Is the sale price in Bellhammer Thailand the same as the sale price in Japan?
I am thinking of using grease for bushes and guides of high-speed presses (600 rpm). Can I use it without any problems?
Can I pay in advance?
I live in Sarawak, Malaysia. How can I send it?
Can it also be used as an additive in atomized engine oils like Harley? Isn't there much carbon?
Is Liquefied Petroleum Gas (LPG) used?
Can it be used for crane booms?
Does it contain PFOA (Perfluorooctane)?
Is there a Belsizer SDS?
Is it possible to clear the DPF blockage by adding a bell hammer to the engine oil?
Can it be mixed with reciprocating compressor oil?
Is it compatible with RoHS2.0?
Please tell me if 27 food allergens, shellfish and gluten are used in the H1 bell hammer series.
How hard is the oil in GOLD and LS standard?
Can I buy bell hammers directly from Suzuki Kiko Co., Ltd.?
On Saturdays and Sundays, can you go to that company (Matsudo City, Chiba Prefecture) to buy?
What kind of grease is LS Bellhammer grease?
Can I use a bell hammer to squeal a belt in a car?
Is it okay to fill the car air conditioner together when refilling it?
If 300 ml of LS Bell Hammer stock solution is added to engine oil, does it have any adverse effect such as deterioration on each packing or seal in the engine?
How do I identify products manufactured after June 2016?
I would like a catalog. Is it possible to mail it?
Can it be used for differential gear as well?
Do you know who sells Bell Hammer such as home improvement centers?
I would like to add the stock solution of GOLD to the bearing grease. Please let me know if there is a recommended addition rate.
Is it okay to spray into the cab? I always spray silicone.
I would like to add it to a gasoline hybrid engine. Are there any types of oil that cannot be used?
Can I apply LS bell hammer to new bearings?
When the bearing shield is opened and LS bell hammer is applied, an appropriate amount of lubricating grease is filled, but it is better to take out the lubricating grease (degreasing) and apply bell hammer gold to refill the grease. ?
Which is permeable, LS Bell Hammer or LS Bell Hammer GOLD?
I would like to use it for an electric hair clipper blade, which is better?
How is the oil resistance compatible with POM?
Does the H1 series include ester compounds?
Is it okay to wipe the bell scissor blade with a melt containing thinner?
Please tell me the courier when you order online.
Is it possible to use it in place of the grease on the bottom brackets of bicycle pedals and hub bearings on wheels?
How many bell hammers can I ship?
It's a super extreme pressure lubricant, but I don't know the difference with other penetrating rust inhibitors. What kind of difference is it?
Can it be used for a magnet clutch attached to a car air conditioner compressor?
Is there a way to get rid of the bell hammer stains on the tiles?
Is there a way to remove the stain on the clothes bellhammer?
Can LS Bell Hammer Cartridge Grease be used in the gear case of an engine mower?
Can I use a bell hammer on my watch?
Can I use it to loosen the screw on the back of my watch?
The sprocket of the bike is made of aluminum. Is there any problem in using such as LS bell hammer and GOLD for the chain when using it for corrosion?
Is it possible to use the undiluted solution of the bell hammer for the oil of the motorcycle drive shaft?
Is the engine noise (noise) reduced when added to a 4-cycle 50cc scooter?
Can you tell us about the oil resistance of polyacetal resin?
Can it be used in a car's rotary engine?
Can Bellhammer grease be used for the ball screw of Hyper Pump?
Do you have an overseas agency?
Is there a country where the Bellhammer cannot be brought in due to legal regulations?
I would like to add it to diff oil. How can I find out if it can be used?
What is the best grease for a bike's rear wheel bearings?
Is there a way to keep the road bike chain from turning black?
Which grease No.0 or No.2 is recommended for heavy machinery?
Is there No. 1 in grease?
Are there grease spray colors?
I would like to use grease No. 2 for the bevel gear in the gear case of the brush cutter. Is it okay to use it for the gear that rotates at high speed?
Can I use it for the accelerator wire and clutch wire of a motorcycle? Is there any effect on the resin?
Can H1 spray be used to prevent galling of stainless steel bolts?
Can the bell hammer spray type be used upside down?
Is it better to shake the bell hammer spray before using it?
Can it be used for brake fluid?
Can it be used for dust seal rubber?
Can it be used for oil seal rubber?
Is there anything that can be used to maintain a compact shreter?
Can I use it for the piston inside the dust seal?
Can I use it to maintain my bike's brake calipers? Doesn't it hurt the seal?
Is the nozzle of H1 bell hammer spray resin?
Is LS Bell Hammer a chlorine-based lubricant?
Will the LS Bell Hammer Corrode Metal?
Is it okay to use a bell hammer instead of molybdenum-based oil as engine oil for wet bikes?
Is it okay to use a new chain with initial oil still on it?
I want to clean the bearing and refill it with your grease. Is it okay to use a parts cleaner when cleaning?
What is the best grease for axle bearings?
What is the best grease for ball joints?
Can it be added to truck diesel engines?
What do you recommend for weight rollers on scooters (AT bikes)?
What do you recommend for the center boss of a scooter (AT bike)?
Does Bellhammer contain Sulfur?
Does Bellhammer contain Vanadium?
It is stated that the bell hammer has a cold resistance temperature of -15°C. If it is exposed to an environment below -15°C even once, will it be unusable even if it is thawed at room temperature?
I would like to use it for a wheel bearing of Microbus. Is there any product that can be used?
Is there any good grease for grease up fishing reels?
Can it be added to the hydraulic fluid of hydraulic machinery?
Is there a problem with Bellhammer when mixed with other molybdenum-based or lithium-based grease?
When I purchased the stock solution in the past, the tape was wrapped around the cap. I thought this was the meaning of [seal], but this time it does not. Why?
Is it possible to add it to the final gear part of the scooter?
Can I use it for a swing arm shaft bearing of a motorcycle?
Can it be used as a motorcycle head bearing?
Can it be used on a motorcycle axle shaft?
Is it possible to use the bell hammer for the motor of the outdoor unit?
Is there anything that can be used for bearings on platters of belt drive record players? I'm looking for something that doesn't fly when it's dry.
Can I use LS Bell Hammer Grease in the drive shaft boot of a car?
Which is more appropriate, to add the LS bell hammer to the car engine oil at the same time as molybdenum disulfide or to add the molybdenum disulfide and the LS bell hammer alternately each time it is replaced?
Please tell me the consistency (viscosity) of LS bell hammer grease No. 2.
Please tell me the difference in the slidability of LS bell hammer spray, undiluted solution and grease.
What is the durability of the LS bell hammer when it receives heat?
Is silicon included in the material composition of the bell hammer?
Is there any problem in using the grease spray in the car space?
How is the degree of scattering of the bell hammer compared to the dry type and wet type of chain lube?
Why is there no LS Bell Hammer Grease No. 1?
Is there an odor difference between LS Bell Hammer and LS Bell Hammer GOLD?
Is it possible to use it to prevent burning during drilling?
Looking for something smaller than the H1 cartridge grease, isn't there a 50ml size product in the LS grease?
Can I use a bell hammer for my air tool?
Please tell me when you sell bell hammers.
Is there any grease that can be used for the drive shaft joint?
Is there any problem with the contents even if the container rusts?
Please tell me the bell hammer that can be used in food factories.
Isn't there a problem such as accelerating the deterioration when applied to nitrile rubber or fluororubber?
Can it be used for agricultural machinery missions?
What is the best grease for a boat trailer tire hub bearing?
Oil for hydraulic cylinder/viscosity grade VG22/NSF H1/ Are there any that satisfy these 3 points?
I would like to use it for the maintenance of the collet chuck. Please advise which type is better.
Is it possible to view the purchase history at the Suzuki Kiko Co., Ltd. head office shop?
When adding it as an additive to car engine oil, is there any engine oil that wouldn't work if added?
Can it also be used for car transmissions?
Is it effective to add bell hammer to cheap oil?
What is the difference between a standard bell hammer and GOLD?
Can I use it for the rubber (dust seal) of the front fork of a motorcycle?
Is it ok to mix LS bell hammer spray and grease?
When the bell hammer is lubricated, how much is the ideal time to spray the bell hammer next time if it is used by blowing a water-displaceable lube (lubricant) from the top of the chain?
Does Bellhammer include MIPA?
Please tell me where to use the bell hammer.
Is it okay to add a bell hammer even if the operating oil or gear oil has a specified number?
Is it possible to lubricate the wheel bearings and axles of the bicycle? Isn't there a concern that the bearing grease inside will flow out?
I am trying to apply it on the sliding part of the throttle valve of a motorcycle carburetor. Can it be used?
I would like to use grease for the maintenance of fishing reels. Is there any disadvantage when using it at sea?
Can I use it for the inner tube of a motorcycle suspension?
Is it possible to add LS bell hammer to machine tool gearbox?
If the bell hammer adheres to the painted iron plate, does it contain any ingredients that attack the paint film?
We are planning to apply LS bell hammer to the connector for optical parts to make the connector rotation smooth. Is there a possibility that the lubricant will volatilize or thermally decompose and contaminate the optical components?
Can I use a bell hammer for the tip saw blade?
Can it be used for crank bearings, cylinders, piston rings, etc. by assembling a 2-cycle engine?
How many Bell Hammer series have you sold so far?
How many online shop purchase accounts have you had for the Bellhammer series so far?
How many trading corporations has the Bell Hammer Series so far?
How do I effectively apply a bell hammer spray to the inner surface and springs of my bike's front wheels for surface treatment?
Is it okay to use it as a sticker on the axis of a record player?
Can I apply grease to the bike chain instead of lube?
Can it be added to the air compressor?
Can it be used as a car accelerator wire?
If I attach grease to a gear that rotates quickly, will the grease scatter?
Please tell me about adding engine oil to ships.
What is the difference between LS Bell Hammer and H1 Bell Hammer?
Can it be used for engine oil with integrated transmission such as Rover Mini?
If grease separates and a large amount of oil flows out, is it better to replenish the stock solution?
Which is better, Bell Hammer or Bell Hammer Gold, for use as an engine oil additive (new vehicle)?
What is the HS code for exporting undiluted bell hammer?
How much m^2 can be used with one 420ml spray?
Please tell me whether or not there is an effect when foreign matter such as soil is sandwiched between iron and iron.
What is the effect of reducing the friction between iron and the ground?
If concrete is effective, please let us know if it has penetrated into concrete.
A bell hammer grease was used instead of the grease used in the air cylinder, and a durability test was conducted, but swelling was confirmed in the urethane rubber of the component parts.
The LS Bell Hammer series cannot be heated mechanically, so is it OK to bring in a heat source from the outside and heat it?
Is it possible to peel off the film formed by blowing with a general parts cleaner?
Is chlorine added? (Other companies sold chlorine-free products)
It is stated that the additive is mixed at 5%, but how much is it performing at 5%? (I also want to see the data at 100% and 1%.)
What are the advantages compared to other companies?
Is it possible to change it by applying heat other than friction? Example) Burning with a burner, applying heat with a heater, exposing to sunlight, etc.
Do you have data on oil deterioration when used at 100 to 200°C?
Is it possible to use the LS Bell Hammer Series with a 2-cycle engine assembly for crank bearings, cylinders, piston rings, etc.?
I am using a bell hammer spray. I couldn't spray it even though there was oil left in the spray.
Gearbox (spur gear Max: 2,000r/min) When adding to lubricating oil, which should be selected, LS bell hammer or LS bell hammer GOLD?
It is an LS bell hammer product, but is there a substance that is dangerous if mixed with something (danger is a fire etc.)?
Please tell me the filling pressure of the aerosol can.
Please tell me the pressure specification of aerosol cans.
Please tell me how to dispose of cans.
Is LS bell hammer grease easier to seep out (oil leakage/drip) than normal grease?
Which of LS Bell Hammer Grease No. 0 and No. 2 is likely to cause base oil (oil/fat) to seep out (oil leak/drip)?
Can it also be used for miniature bearings?
Can it be used for edge treatment of skis, snowboards and scoots?
Is it effective for car sliding doors?
Can I use it for the inner tube of a motorcycle suspension?
Is it possible to apply it to the piston after OH of the brake caliper?
Can it be used as a measure against abnormal noise in the ventilation fan?
Can it be used as a pulley for shutters and screens?
Please tell me about the bacterial protection of H1 Bellhammer (resistance to the growth of bacteria, yeast, mold, etc.).
Please tell me the waterproofness of H1 bell hammer grease.
Please tell me the places that can be used in the car engine room.
I'm looking for a Grease 00 product. Is it in the product?
There is a place where metal rubs against each other to generate heat. Is it possible to suppress the heat by using a bell hammer?
Is it okay to put a bell hammer in the tractor mission oil?
Is there an expiration date for the bell hammer?
Is LS Bell Hammer sensitive to water?
Which is better, normal or gold, for use on road bikes?
Does LS Bell Hammer Spray 420ml and LS Bell Hammer GOLD Spray 420ml contain "phosphorus" (CAS No. 7723-14-0)?
It seems that the color of the grease has changed. Does the LS Bell Hammer GOLD grease come in white when ordered now?（2020.08.24）
Please tell me how to use it for fishing reels.
Is it also effective for bicycle and motorcycle chains?
Can bell hammers be used at tractor and trailer connections (couplers and kingpins)?
Can I use a bell hammer to grease up the chassis of a tractor or trailer?
Can Ls Bell Hammer Cartridge Grease be diluted with oil and used as an additive for engine oil?
Can I use Berhan Margold undiluted solution on a manual transmission?
I think I used it for the chain. Is it after degreasing before using it for the first time?
Is it possible to eliminate the sticking of the bicycle frame and seat post (both aluminum)?
How is it compatible with DLC coating?
Can Bell Hammer 7 be used for rotary engine vehicles?
Can I add it to industrial machine oil to extend the life of the gears in the gearbox?
I would like to inject a bell hammer additive into the compressor. Please tell me which one to choose.
Can Bellhammer Seven be added with mineral oil or synthetic oil?
Can Bellhammer Grease be used on the piston part inside the clutch operating cylinder of a car manual transmission car?
Can Bellhammer Seven be used for diesel engines?
Is it possible to add to the engine of LPG cars such as taxis?
Which is better as an engine additive, Bell Hammer Seven or Bell Hammer Gold?
What is the difference between the undiluted solution of LS Bell Hammer and Bell Hammer Seven added to engine oil?
Can Bellhammer Seven be added to snowplow engine oil?
Can I get a certificate for 10 substances under the RoHS (2.0) Directive?
Can I get a certificate regarding REACH regulated substances?
Is it okay to add Bellhammer Seven to the scooter engine oil?
Is there a small amount of products at Bellhammer Seven?
Please tell me the difference between LS Bell Hammer GOLD and Bell Hammer Seven.
Which is better, adding even a small amount of the LS Bell Hammer Series (Bell Hammer Seven) to the engine of a car every time, or adding it once every two times?
When will the effect be effective if Bell Hammer Seven is added when changing the oil?
When used for maintenance of the axle shaft of a motorcycle Which is better, No. 0 or No. 2 of Bell Hammer Grease?
Can it be used for maintenance on motorcycle engines?
Is it okay to add an LS bell hammer to a moped (50c scooter) engine (4 stroke)?
Is it okay to mix a bell hammer and an oil leak preventive additive with engine oil?
Can the bell hammer be used to press fit bearings?
Can Bell Hammer Seven be added to outboard engine oil and gear oil?
Can I use a bell hammer as a gear for fishing reels?
For new cars, should I get used to it before adding the bell hammer?
Is it possible to expect an effect on oil loss through valve guide by using Bell Hammer Seven?
Do you have any recommended grease for your car?
Within the range of JIS mixing consistency, No. 0 is 355 to 385, No. 1 is 310 to 340, No. 2 is 265 to 295, and No. 3 is 220 to 250. Is it okay to say that the consistency of LS Bell Hammer Grease No. 2 is exactly No. 1?
Is it okay to add Bell Hammer Seven to a light car?
Molybdenum disulfide-based additives are added to cars. I would like to add Bell Hammer Seven at the next engine oil change, but is there any adverse effect?
Is the LS Bell Hammer domestically produced?
Which is more durable, LS Bell Hammer Standard or Gold?
Is it okay to put the LS Bell Hammer Spray in the engine oil?
Which bell hammer should I use for the electric shutter?
I would like you to make a grease type spray can of bell hammer.
I would like to use a bell hammer for a bicycle shift wire, but the wire goes through a resin liner tube. How is it compatible with resin?
What is the "super extreme pressure" of super extreme pressure lubrication?
The movement of the pot (handle) was slow, and when I attached the LS bell hammer, the movement improved, but I was worried about the smell of oil.
(If it is a differential mission with a mechanism that can use additives) Is it okay to use Bell Hammer Seven as an additive for differentials and mission oils?
Can it be used in places where switches (buttons) such as motorcycle blinkers do not move well?
(Without clutch mechanism) Can Bell Hammer Seven be added to the engine oil of a marine engine with a horizontal piston?
Which product is most suitable for use as a working lubricant for plastic parts?
Can it be used on British cars from the 1950s to the 1960s without any problems?
Does the LS Bell Hammer Series swell and deteriorate the rubber resin?
I would like to use it for the engine part of a hunting rifle for the purpose of lubrication and rust prevention. Which product is better? I also want to avoid sticking due to deterioration.
Bell Hammer Seven uses a chlorine additive, but what about the environmental impact of chlorine gas? Also, what about the effects on metals (especially tightening of sleeves and piston rings) due to long-term use?
What is the difference between LS Bell Hammer, Bell Hammer Seven, and Bell Hammer Light?
Is it possible to use LS Bell Hammer Grease No. 2 where lithium grease is used for large dump trucks?
Can it be added to the differential oil of Mitsubishi Minicab?
Are there any additives for clean diesel? If not, do you have any plans to release it?
Is it possible to add Bell Hammer Seven to the engine oil of hybrid vehicles?
I am currently adding 10% of LS Bell Hammer. Will the effect be reduced if the addition ratio is reduced to 5% in the future?
How about using it for tie rod end boots?
The fuel consumption has been reduced by adding Bell Hammer Seven.
Can Bell Hammer Lights be used on motorcycles?
How long is the trial project LS Bell Hammer GOLD Spray at Rakuten Ichiba?
Do LS Bell Hammer Grease and LS Bell Hammer GOLD Grease have to be used in different places depending on the application?
Are you planning to do a trial project of Bell Hammer Grease?
Is it possible to repair the hugging (lightly seizure) of the 2-stroke engine with the LS Bell Hammer GOLD?
Which grease should I use for ball bearings?
I put LS bell hammer grease on top of the grease that was originally in the bearing. I'm in good shape, but I don't think I can push it in firmly.
Which is better for chassis grease?
Can the Bell Hammer Light be used in a light vehicle with a turbo?
I'm looking for grease. I would like to apply it to the sliding parts of metal parts and the sliding parts of rubber bushes.
What is the difference between Bell Hammer Seven and Bell Hammer Light?
Is this product effective for dry start of the engine with LS Bell Hammer undiluted solution?
Is LS Bell Hammer Gold also effective for fluorine coating?
Should I choose Bellhammer Seven or undiluted type if I want to add it to the engine oil and gear oil of the scooter?
Bellhammer grease No. 0 and No. 2 have different raw material content of 5% and 10%. Is the performance different?
Is Bellhammer Seven effective in lowering and raising car engine oil?
There was a white lump in the H1 bell hammer stock solution.
Please tell me how to use LS Bell Hammer and LS Bell Hammer GOLD properly for internal combustion engines.
Can grease be used for engine built-in oil?
As a car engine oil additive ・ LS Bell Hammer GOLD ・ Bell Hammer Seven ・ Bell hammer light Which one should I choose?
I ran with Bell Hammer Seven and Bell Hammer Light and it was time to change the oil, so when I checked the oil, it was completely black.
Isn't Bellhammer Seven less effective when added to mineral oil (10W-40-45) instead of synthetic oil?
Does Bellhammer Seven increase or decrease its viscosity even if it is added to hard oil?
Can Bellhammer Seven be effective even in overrunning older cars?
Please tell me the difference between LS Bell Hammer Spray and LS Bell Hammer Grease Spray and where to use it.
Should the bell hammer light be turned on at the timing of oil change?
Is it okay to put Belhann Marseven in a Harley?
Can I use LS Bell Hammer GOLD, Bell Hammer Seven, and Bell Hammer Light where WPC and DLC are applied in the engine?
Which is better costco performance, LS Bell Hammer or LS Bell Hammer GOLD?
When applying to a bike chain, which one, LS Bell Hammer or LS Bell Hammer GOLD, does not scatter?
Is it possible to replace the RC helicopter with grease or oil?
Is there a recommended lubricant for plastic gears and plastic gears?
Does the H1 series include HACCP and 27 allergens?
Giboshi is used to electrically connect the attachment to the main unit. Since the male and female connections are tight, is it okay to spray the bell hammer?
Is it okay to add Bellhammer Seven to my motorcycle engine oil?
Is it okay to add Bell Hammer Light to my bike's engine oil?
Is it okay to add LS Bell Hammer to motorcycle engine oil?
Is it okay to add LS Bell Hammer GOLD to the engine oil of my motorcycle?
Is it safe to add Bell Hammer to ATVs (transmissions)?
I mistakenly put in more Bell Hammer Seven than the prescribed amount, is that okay?
Does the LS bell hammer need to be heated to the metal when it is used for it to be effective?
Are LS Bellhammer, LS Bellhammer GOLD and H1 Bellhammer exempt from the Export Trade Control Order?
Which Bell Hammer is recommended for use on sliding doors of cars?
I want to use LS Bell Hammer Spray 420ml to disassemble a machine, but there is grease in the seized area and I cannot remove it. Is there any problem if grease from other companies is mixed in?
I would like to apply it to the shock absorber of my car's suspension.
I want to use the LS Bell Hammer series for musical instrument maintenance.
Is it more effective to apply grease after applying LS bell hammer spray or undiluted solution to bearings?
Please tell me where I can use LS Bellhammer Cartridge Grease No.2 420ml in automobiles.
Please tell me how to maintain a lightweight reel.
Can it be used for propeller shafts?
What is the date on the back of a can of Bellhammer undiluted?
Bellhammer Light, Bellhammer Seven, will the jingling sound of the engine timing chain go away?
Is a bell hammer useful when starting a car that has not been started for a long time?
When using bell hammer grease on agricultural machinery, should I use No.0 or No.2?
Can I use Bellhammer Light and a leak stopper together?
Are the grease numbers 0, 1, and 2 in order of hardness?
Can I use the Bell Hammer Light on a 4-stroke bike?
Can it be used to maintain the helicoid of a camera?
Is it possible to use Bellhammer Gold undiluted for power steering oil? If so, how much should I add?
Is it safe to add it to the engine, transmission, and differential of a 10-ton dump truck (MT)?
Can I use a bell hammer to maintain my snowblower?
Can I mix and match LS Bellhammer and Bellhammer Seven?
Please tell me about the balance of Bellhammer Seven, Bellhammer Light, and LS Bellhammer GOLD when added to the engine of an overrunning car (CVT, AT).
Can LS Bell Hammer and LS Bell Hammer GOLD be used as chain lubes for motorcycles? Is there any problem with the aggressiveness of the rubber?
I'd like to use it on a non-turbo regular car with 97,000 km on the odometer. Which do you recommend, the Bell Hammer Seven or the Light?
Why is the grease soft and dripping?
Can LS Bell Hammer Grease be used with constant velocity joint grease in the driveshaft boot?
What is the container material for a 50ml bottle of Bellhammer grease?
Does the Bellhammer series work on oil leaks?
Can I use a bell hammer on my bike chain?
Do you have experience using bell hammer as a lubricant for tapping screws or forming presses? Especially for stainless steel materials, to reduce the thermal conductivity and to reduce the load on the tool due to high temperatures.
How is the bell hammer fast drying and volatile?
Has Bellhammer Seven been used on the R35GTR?
If I don't add Bell Hammer Seven at every oil change, will it lose its effect?
I added Bell Hammer to the bearing and the noise disappeared. Is it a life extension situation? Will it continue to be in a quiescent state?
Which product is best for greasing the gears inside a polisher, hand grinder, etc.?
Can I use a bell hammer on my sewing machine?
Who is the manufacturer of the bell hammer?
Please tell me about the hardness of Bellhammer grease No.2.
Which is the best product for truck chassis grease?
What is the best grease to put on the gears of a reel?
I'm not sure if I should buy a Bellhammer Lite or a Bellhammer Seven for my mid-engine car.
Can I use Bellhammer as an engine oil additive for Jet Marine?
Does Bellhammer Seven have anything for motorcycles?
What type of Bellhammer should I add to my car's transmission?
Can it be used for air conditioner compressors?
Can Bellhammer 7 be used with oils of different viscosities?
If a bell hammer is applied to the painted surface of the sliding door of a car, will the paint come off?
Can it be added to the power steering fluid instead of the car's engine?
Are there any types of light vehicles to which Bell Hammer Light cannot be added?
Can I use Bellhammer 7 for large bikes?
Will Bell Hammer Seven work with Super Cub?
Is it better to change the oil element at the same time for Bell Hammer Seven?
Can Bellhammer Seven be used on an engine (Rover 18K) that requires oil leaks?
Can Bellhammer 7 be used on mopeds?
Which undiluted solution is best to add to the compressor of an air conditioner?
Can I use it for 200 series Hiace diesel? How much should I add?
Does Bellhammer have any contact revival effect on electrical terminals?
Can I use Bell Hammer Seven on my scooter?
Can I use Bellhammer seven as differential oil for three-wheeled bikes?
How much Bell Hammer Seven should be added to 3 liters of 660cc light turbo oil?
I just had an oil change and the oil level is full. Should I drain the oil when I put in Bellhammer 7?
If I put Bellhammer Seven in a car that is consuming a lot of oil, will it have any effect?
I found a little cloudy white stuff at the bottom of a bottle of Bellhammer Seven, is that a problem?
Does Bellhammer 7 make a difference depending on the grade of engine oil?
I think the undiluted LS Bellhammer is more cosmetic than Bellhammer Seven or Bellhammer Light, but is the effect the same?
Most of the oil additives that look good can't be used on a 4-stroke bike?
What happens if I put a bell hammer light in an old car (2000cc)?
Doesn't the bell hammer light leak oil without melting the gaskets and rubber system?
Does the BELLHAMMER series work for fret wear on guitars? The frets are made of nickel alloy and the strings are piano wire. I would like to apply it to the frets and strings, but please let me know how to do so effectively.
Can the undiluted solution of the Bellhammer series be used for transmissions, transfers, and differentials in addition to adding to engine oil?
Is it safe to add Bell Hammer Light to the engine of a standard car running on a circuit?
Which is better for a car with over 100,000 km, Bellhammer Seven or Bellhammer Light?
I have tried to store the contents of the spray in a container, but it doesn't seem to subside after several iterations. Is the gas intentionally made to dissolve strongly? Also, does this gas have any effect other than spray pressure?
Is there a grease that can be used on the constant velocity joint of the drive shaft of a car?
"It says, "You can mix Bellhammer 7 with Bellhammer Light. but can I put all of them in one bottle at a time?
Is it safe to use Bellhammer 7 on an old American car engine?
Can it be added to the engine generator? If so, which series would be the best to add?
I have a long commute that puts a lot of strain on my car and I want to work on the engine.
Is there a possibility that the Bellhammer series will become sludge, etc. when it is subjected to high temperatures and high loads for a long time, such as during circuit driving?
Is there a suitable product to use for the gearbox?
If I use it outdoors on shutters and bicycles, should I spray it again after rain?
I want to add Bellhammer Seven and Bellhammer Light to another vehicle that has undergone an engine overhaul.
Is the bell hammer light only available for light vehicles?
I would like to see Bellhammer in the transmission oil and differential oil as well, can I cover everything undiluted?
I used to have an additive that made the engine run incredibly light, but it melted the gaskets and other parts, causing oil leaks everywhere.
I want to add it to my light car transmission oil, which one should I buy? Is Bellhammer Light the right additive to put in my engine oil?
Is it too late to add this to a car that loses oil?
Can LS Bellhammer, LS Bellhammer GOLD, Bellhammer SEVEN, Bellhammer LIGHT be added to supercharger oil?
Are there any side effects from mixing it with engine oil?
Basically, we can handle mineral oil, synth oil, ester oil, etc. without any problem.
Is it better to put the additive after the engine is warmed up? When I change the oil, can't I put in the additive first and then put in the oil?
I put in Bellhammer Seven and Bellhammer Light, turned the engine over, and the RPMs dropped. It's okay, right?
I am a repeat buyer of Bell Hammer 7. Have the ingredients changed since 2020?
I have engine cleaner in my gas tank, how is it compatible with bell hammer?
The oil resistance chart of LS-H1 bell hammer says that it affects rubber/plastic/resin, but does it?
I am using Bell Hammer on my bike chain. How long do I need to top coat it? Or should I clean the chain once and spray it anew?
I want to use an engine oil additive for my motorcycle, but I don't know which one to choose. My bikes are a 1956 Harley Davidson FLH and a 1983 Honda CB 1100F.
Do all the bell hammers need to be put in at once, or will they deteriorate?
Can the Bellhammer series be used for four-wheel transmissions?
How many kilometers is the standard oil change when I add Bellhammer oil additive? Also, how many months is the oil change period?
It is said that some Teflon additives can fill the cross hatch and cause a dry start, but is Bellhammer free of this concern?
Does the bell hammer light have any effect on oil rise and fall?
What is the difference between LS Bell Hammer Grease Spray and LS Bell Hammer Grease?
Can the Bell Hammer Light be used on diesel engines?
Is undiluted LS Bell Hammer too thick for a road bike chain?
How does the LS bell hammer work with gear oil? I would like to try it on my automobile transmission.
Can I mix Bellhammer with vegetable oil?
Do you put the bell hammer on the drag? If it slips too much, what's the point of the drag?
Can the product be used with 4-stroke outboard motors?
Can LS Bell Hammer be used with engine oil? Does it have to be Bellhammer 7?
I'm sure it's fine to use it to lubricate oil pumps and gear reducers, but is it safe to use it to lubricate "Bayer reducers"? The Bayer gear reducer has a structure where the discs rub against each other inside, and I have a question about how it works.
I use a bell hammer sprayer and recently the liquid has stopped coming out. If I shake the can more, it comes out only then. But this is only temporary and does not last.
Can I use the Bell Hammer Light on my compact car?
Does Bellhammer 7 work on horizontally opposed engines?
Is it possible to use a bell hammer on the crank bearings when assembling a 2-stroke engine?
Can undiluted LS Bellhammer GOLD be used as an additive for MT gear oil in light vehicles?
If I were to add it to my engine oil, would Bell Hammer Light be more effective compared to LS Bell Hammer GOLD and Bell Hammer Seven?
I am using AdBlue in a diesel engine car, can I use Bellhammer Seven?
Are there any products that do not produce outgassing that could contaminate optical components? (Would No.0 and No.2 have less outgassing?)
Why is there no inner plug for the Bellhammer Seven?
Is it possible to use Bell Hammer Lite in combination with a commercial oil leak preventer?
Can LS Bell Hammer GOLD undiluted solution be used on the transmission and differential of a motorcycle with a dry clutch?
I own a diving work boat. Do you have any recommendations for a bell hammer for a large diesel engine? The marine gear and engine oil are separate.
I use TAYLOR LUBE grease to clean my soft serve machine but I'm considering trying H1 Belhammer instead. I want to make sure it's safe to use for heating and pasteurizing the soft mix at around 80℃, as well as for touching and consuming the mix.
In the SDS for LS Bellhammer Spray 420ml, 3. Composition and Ingredient Information, mineral oil is undisclosed. Is it correct to interpret that [no hazardous substances are contained]?
Is it safe to use a bell hammer with an air nailer?
Is it possible to add Bellhammer Seven (and Bellhammer series) to a light car that has started to have gear squeal in the rear differential?
Can I add Bellhammer Seven to 2-stroke transmission oil?
Can LS Bell Hammer be used to lubricate the bearing and gear parts (reinforced resin mixed with aluminum, carbon, etc.) of reels? (water seal and other parts are general rubber gaskets) Please let me know if this will affect the material.
I put bell hammer seven in my new car and the check engine light came on. Is there a problem?
Is it safe to apply the bell hammer to the wheel bearing as well?
Is there any concern about seizure of the bell hammer?
How many times can I use 80ml of LS Bell Hammer undiluted solution for a motorcycle chain?
Is Bellhammer Lite compatible with other additives/oils?
Does LS Bell Hammer cartridge grease ever liquefy?
Is it safe to spray LS Bell Hammer GOLD Spray lightly through the hole in the cylinder bed of a scooter?
Bell Hammer Seven and Bell Hammer Light should be used up in one time, but what inconvenience will happen if they are not used up?
Is there any difference in ingredients between spray cans and bottles?
I use Bell Hammer Lite, how long does the effect last after an oil change?
Can Bellhammer Seven be added to a vehicle with common rail and DPF?
Can Bellhammer Lite be added to Yamaha VOX gear oil?
I've been storing my Berghammer Lite for a long time and I've noticed blue-black sediment at the bottom of the container, should I not use it?
There is white sediment at the bottom of yamanaka special, is there a problem?
Is the bell hammer safe for use on the clutch cable?
I have been storing Belhammer Seven and it has a brownish discoloration, is there a problem with adding it?
Can the Bellhammer Seven be used for differentials?
Can the Bellhammer Seven be used on an air-cooled Beetle?
Is there anything for tractors or other farm equipment? I'm wondering if this is a preventative measure, since these devices are overworked for short periods of time and put a lot of stress on all parts of the body.
Can it be used for Rimowa casters?
Please let me know what happens if the bell hammer spray is crushed between machines, etc., or if the can is compressed and crushed.
I am adding STP oil treatment to increase oil pressure, can I use it together?
I am considering bell hammer spray, is there color after application?
What are the compositional differences between Bellhammer GOLD and LS Bellhammer?
We are thinking of using a small diameter bearing (about 15mm dia.). Do you have any recommendations?
Does LS Bell Hammer Grease contain any granular additives?
How do you determine if grease has run out if regular application is required?
What are the main ingredients and other general details of LS Bell Hammer Grease?
What is the heat resistance temperature and usable temperature of the LS bell hammer?
I have applied undiluted Bell Hammer Gold to the suspension shafts, but is it okay to apply Bell Hammer Metal Grease? If so, is it more effective than Bell Hammer Gold undiluted solution?
I plan to add Bellhammer Seven, but should I add less oil for the activator? Or is it ok to leave it as it is?
When Bell Hammer Metal Grease is used to prevent truck wheel nuts from sticking What torque should be used to tighten the nuts?
Does Bell Hammer Metal Grease affect rubber or resin?
I want to prevent dust, etc. from sticking to the grease and causing poor movement after long-term use. Can bell hammer metal grease be substituted for clutch sleeve grease or spline grease in 4-wheeled vehicles?
I'm thinking of using either LS Bell Hammer Gold or Yamanaka Special mixed with the respective engine oils for both 2-stroke and 4-stroke bikes for bore-up kit assembly. If there is any difference between 2-stroke and 4-stroke, please let me know.
Can Bell Hammer Metal Grease be used on gear drive parts of power tools?
Regarding Bell Hammer Gold and Bell Hammer Metal Grease, is it possible to mix the two? I would like to know if it is possible to adjust the viscosity and if mixing the gold with the metal grease will make it more metal-like in nature.
Can bell hammer metal grease be used on brass? Is there any possibility of corrosion?
What are the pros and cons of H1 Bellhammer compared to a typical silicone spray?
Does LS Bell Hammer include PFAS?
I am using LS Bell Hammer Gold grease for the seal chain, is it safe to use metal grease?
Regarding fishing tackle reels, is it safe to apply bell hammer to the felt or carbon parts of the drag?
1) Use a bell hammer (spray) once on the bicycle chain. 2) Then clean with degreaser, etc. 3) Apply chain lube after cleaning. Is it possible to use these together with the modified metal surface? Is there likely to be synergistic effects?
Can this be used for bearings on the primary compression side of the crankshaft of a moped scooter?
Is it LSPI compatible oil?
What is the difference between Yamanaka Special and LS Bellhammer's undiluted solution?
Does putting Yamanaka Special into an older engine cause problems?
Is it okay to mix LS Bell Hammer Spray with LS Bell Hammer Gold Grease No.2 to reduce the viscosity of LS Bell Hammer Gold Grease No.2?
Are there any additives you recommend for scooters?
Can it be used in places where electricity is flowing, such as motors?
If I put Bell Hammer Seven in the gearbox of a scooter, is the viscosity of the oil in it safe?
Does metal grease work on the shock absorber rods of a car or the inner tube of a motorcycle fork?
I put a bell hammer light in my Prius. Is there a problem?
Which has lower viscosity, LS Bell Hammer Gold or LS Bell Hammer? What is the approximate hardness of each?
Can LS Bell Hammer Grease No. 0 be used to lubricate high rotating plastic and steel gears?
With LS Bell Hammer Spray, LS Bell Hammer Gold and Super Ryusei, what would be the order of viscosity softness?
Is it safe to use on metal vs. plastic? (The location is at the end joint of the stabilizer.)
Is there a good additive for oil consumption in cars?
What are the characteristics of Phantom and Diesel, and the existing Seven, Light, and Gold, respectively?
I would like to use it on a thrust bearing about the size of a pinky fingernail in a very high-rotation area (high load and temperature of 100°C to 150°C). Which would you recommend, Bell Hammer Metal Grease or LS Bell Hammer Gold Grease No. 2?
Could you please let me know if there is any grease that is suitable for the countershaft of a motorcycle?
I am driving a Gixxer 150, and the shifting is hard and does not improve. Is it safe to add Bell Hammer to the engine?
Is it safe to use metal grease on the stabilizer links of a car?
There are scattered videos of people using a bell hammer on a motorcycle chain and it splattered on the tire and slipped. Is that too much on and not enough wiped off?
There is a regulation to use ISO VG22 or VG32 oil, but is bell hammer equivalent to the regulation?
I would like to use it for maintenance of my brushcutter. So, just to confirm, is it safe to spray gold through the intake port and lubricate the piston and crank area as engine maintenance? Also, is grease or spray suitable for the shaft?
Why do you use mineral oil as the base oil for bell hammer oil? I have a feeling that if synthetic oil were used as the base oil, it would be an even higher performance oil. Is there any plan to release Bell Hammer synthetic oil?
I tried to use metal grease on the new tensioner, but it was jarring, probably due to the solid lubrication. Is it better not to use metal grease?
We are planning to use it to grease up the operating parts of a dual-axis tracking solar power generation system manufactured by PAL in Korea.
I am thinking of using it as a lubricant for the fan belt that the exhaust duct of the draft chamber connects to, is there an appropriate type of lubricant?
Does LS Bell Hammer Grease contain heavy metals?
I am working with a 25-ton KATO rafter crane. Can you tell me what kind of grease I can use for the "crane hoisting cylinder," "boom foot pin," and "boom extension/retraction area"? If so, can we use it even if the tonnage of the crane changes?
Can Bellhammer be added to the engine oil of a Honda motorcycle engine type BA-AF55?
I bought some metal grease, but when I opened the lid, liquid was pooling on top. I think the oil content is separating, should I mix this liquid in?
We are driving a ladle with bearings and chain in equipment that reaches around 650°C. The effects of the heat are high, and the bearings are deteriorating and the chain is badly worn. Will metal grease be effective in such an environment?
Is Bell Hammer Grease suitable for lubricating tie rod ends and ball joints of lower arms of automobiles that normally use lithium-based grease?
We use press dies in our aluminum sash production line. We use metal grease on parts of the dies that are subject to loads, such as slide sliding and punch sliding, but which would be appropriate for your products.
How can I improve the metal surface if there is little or no initial friction at the point where the bell hammer is used? Is there any effect if the surface temperature is raised beforehand?
Does H1 bell hammer contain PFAS (perfluoroalkyl and polyfluoroalkyl compounds)?
It is stated that mixing with other additives is prohibited in Bellhammer Seven. Do I have to remove the one I am currently using?
I would like to know the differences and effects between Bellhammer Seven and Bellhammer Diesel.
I am looking for motorcycle stem bearing grease, what is your recommendation?
Can it be safely used for moving parts other than the extraction part of a coffee machine (De'Longhi)?
If I use Super Ryusei for piston mopping during brake maintenance on a motorcycle, will it be aggressive to the oil seals?
Is it safe to use LS bellhammers for sintered oil-impregnated bearings?
I would like to know what products can be used for door hinges, which are important for opening and closing car doors.
Is it safe to use Bell Hammer Gold on shredder teeth?
I am considering applying LS Bell Hammer Gold Spray to reduce edge loss in ski races. I understand that the film reacts with heat, but can it be formed with a waxing iron (approx. 150℃)?
What is the heat resistance temperature and dripping point of LS Bell Hammer, LS Bell Hammer Gold, and H1 Bell Hammer greases?
I would like to grease up the steering shaft and joints. (standard car/mini car)
Are there any incompatible products with Bellhammer Seven and Bellhammer Light? Also, if I put it in synthetic oil (expensive oil) or inexpensive oil, will I feel the effects better if I put it in expensive oil?
Is it safe to use on the slide pin portion of an automobile brake caliper? Of course, it is not for use in the brake rotor section, but for the caliper itself to move smoothly.
Assuming bell hammer grease is used, I think the grease will stick out when pushed in. Would bell hammer spray not be good for areas that get hot?
I don't know what to choose due to the wide variety of products available, so any advice or recommendations on products to use for road bike chain lubes?
Is it ok to apply bell hammer metal grease to the valve stem when assembling the valve?
I am considering having a complete clutch set (disc, cover, fork, release, bearings, etc.) replaced with a new one. In doing so, I think I will apply grease to the sliding parts. What is the best grease among the Bellhammer series?
Can Bellhammer silicone grease be used in wet areas?
Unlike coatings from other companies, you say that the product has friction power while adding shine, but is it safe to use on scooter floorboards (unpainted resin black material)?
I purchased Yamanaka special and checked the product and found that sediment had accumulated. I shook the bottle and stirred it, but it does not mix. Is there any problem if I use it as it is?
My Belhammer Gold Spray ran out of gas before I used it up and I can no longer use it. Is there something wrong with it?
We have tried metal grease and found it to be effective, so we are considering adopting it. Therefore, we would like to know about the environment in which the metal grease is used.
I am considering using Bell Hammer as a lubricant for the ceramic bearings in the hub of my run bike tire. Is there a product you would recommend?
Which grease is better to use on the gears of a polisher that polishes cars, No.0 or No.2?