Bell Hammer Metal Grease has high lubricity, adhesion, and load resistance,
It can be used as an assembly grease when assembling engines for automobiles, machinery, and other equipment.
It is effective in preventing wear due to dry starting at initial startup, and is suitable for application to sliding parts such as bearings in the crankcase and camshafts.
On the other hand, we basically do not recommend its use on motorcycle engines.
Many motorcycles use a wet clutch system,
Even a small amount of assembly grease,
If it gets mixed in with the engine oil and reaches the clutch mechanism,
This can cause clutch slippage or malfunction.
For this reason, please refrain from using this product inside the engine of a motorcycle,
Please consider using the product in non-engine parts.
(Cautions) ・Not only the minimum amount of grease is necessary, but also the maximum amount of grease should be used.
Use only the minimum amount of grease necessary and avoid excessive application.
In the structure of an automobile where engine oil circulates, grease will naturally disperse and dilute after use,
However, it is assumed that the grease is used within the range where it does not affect the engine oil.
Please feel free to consult with us about products that meet your requirements, depending on the application.