Bellhammer No. 2 is a lithium-complex grease that provides excellent lubrication performance even under high load and high rotation, and can be used safely for drive shafts (drushers) of standard cars.
Recommended amount to be used
Recommended amount for use in bellows-type drasher boots: approx. 80 to 100 g per side,
The amount of lubricant used in a bellows-type drusher boot is generally about 80-100g per side. It is recommended to use about 160 to 200g for both sides.
The amount of the product used in the drasha boot will vary depending on the model and structure of the car, so please use this as a guide.
Replacement for higher performance
When the product is expected to be used under more severe conditions (high temperature, high load, high speed rotation, etc.),
If you expect to use Bell Hammer No.2 under more severe conditions (high temperature, high load, high speed rotation, etc.), you can replace Bell Hammer No.2 with “Bell Hammer GOLD Spray” + “Metal Grease”.
Bell Hammer GOLD Spray” + ‘Metal Grease’ is also an effective method to replace Bell Hammer No. 2.
Specific usage:
Apply GOLD Spray lightly to shafts and sliding parts that are prone to wear.
→ Forms a lubricating film on metal surfaces, providing initial blending and anti-wear effects.
Apply an appropriate amount of metal grease on top of it
→ Metal grease has excellent extreme pressure and heat resistance, and prevents grease dispersion and deterioration.
In this way, the use of GOLD Spray + metal grease in combination as a supplement has been highly evaluated for its durability and reliability, which is one rank higher than that of the use of normal grease alone.
Especially, owners of circuit-running vehicles and tuning cars have commented that the GOLD SPRAY + METAL GREASE is more durable and reliable than the normal grease used alone,
Especially, we have received comments from owners of circuit-running vehicles and tuning cars that “there was little splattering or deterioration even after driving”.
Translated with DeepL.com (free version)