There are various bellhammer additives, but when adding to a hybrid vehicle 1. Recommended additives 2. How to use 3. Cautions What about the above?

Recommended additives for hybrid vehicles/How to use/How to be careful

1. recommended additive
   → We recommend the use of “Bellhammer Seven” for engine oil.
   This product is a premium model with excellent lubricating performance, durability, and quietness among our additive series, and is an excellent match for hybrid vehicles, where quietness and low vibration are important.

2. How to use
   → Add 5-10% of the total amount of engine oil at the time of oil change.
   (For example, if the amount of oil is 4L, 200-400ml of Belhammer Seven is recommended.)

3. Notes
   → Hybrid vehicles tend to have shorter engine running time, but the lubricating effect of Bell Hammer Seven is well demonstrated at engine startup and under high load.
   It is especially effective in protecting metal contact during a dry start (when the oil film has run out) immediately after starting.

Other suggestions and advice

Hybrid vehicles frequently turn the engine on and off
due to idling stop and regenerative braking.
→ Bell Hammer Seven forms a lubricating film on metal surfaces even under such intermittent operation conditions, and is effective in reducing wear and vibration.

In the future, if you experience abnormal noise around sliding door opening/closing parts, seat rails, steering wheel, etc., use “LS Bell Hammer GOLD Spray” to
eliminate creaking noise and ensure smooth operation.