Compositional change and heat on metal surfaces]
As you pointed out, the exact meaning is “a lubricating film is formed on metal surfaces by friction, and is stabilized and strengthened in the process of repeated sliding (friction)”.
Bellhammer GOLD forms a lubricating film on metal surfaces, even on parts that do not easily get hot, such as inner tubes and wires, and is highly effective in reducing wear, noise, and sliding resistance.
Although the lubricating film tends to become more stable when friction resistance is strong enough to generate heat, the product is designed to demonstrate sufficient lubricating performance even without high friction or high temperature environments.
Therefore, it can be used safely in normal sliding environments.
■[About using with fork oil]
Bellhammer GOLD applied to the inner tube of the front fork may slightly flow into the fork oil during use.
However, there is no significant effect on performance in the normal range of use.
However, it is safer to use Bell Hammer GOLD only on the outer surface of the inner tube (sliding dust seal) and refrain from intentionally mixing it into the fork oil, since the viscosity balance of the oil may change if it is mixed into the inner tube.
■[About mixing with other greases]
Bellhammer products are designed to prevent chemical reaction, separation, and performance degradation even when mixed with greases from different manufacturers or with different base oil components.
However, depending on the mixing ratio and operating environment, there is a possibility that the original performance may not be fully demonstrated, so we recommend using them alone if possible.